Interval Shooting - Leica M11 Instruction Manual

Notes
• We recommend deactivating the preview mode (
when using this function.
• The specified picture sequence stated in the technical information
refers to a default setting (
ISO 200
and number may vary depending on the settings, the image con-
tent, the setting and the memory card used.
White Balance
• Regardless of how many pictures were taken in a series, the last
picture in the series or the last picture saved on the memory card
while the save process is ongoing will be displayed first in both
review modes.
• Continuous shooting with
Continuous - High Speed
at a frequency of max. 4.5 fps, provided shutter speeds of 1/180 s
or faster are used.
• Continuous shooting is not possible if a flash is used. Only a single
picture will be taken if the flash function is activated.
• Continuous shooting mode is not available in combination with
the self-timer function.
• The buffer memory of the camera only allows a limited number
of frames in series and in the selected exposure frequency. The
exposure frequency is reduced, once the capacity limit of the
camera's buffer memory is reached.
116
PHOTOGRAPHY ▸ SHOOTING MODES
)
Auto Review
, JPG format ). Frequency
L-JPG
set are taken

INTERVAL SHOOTING

This camera allows you to capture motion sequences over extended
periods of time automatically using the interval shooting function.
You specify the number of frames, the intervals between shots, and
the start time of the series.
The exposure and focus settings are no different from those for nor-
mal pictures, but you should remember that the lighting conditions
may change during the course of the picture series.
SPECIFYING THE NUMBER OF FRAMES
▸ Select in the main menu
Drive Mode
▸ Select
Interval Shooting
▸ Select
Number of Frames
▸ Enter the desired value
SPECIFYING THE INTERVALS BETWEEN SHOTS
▸ Select in the main menu
Drive Mode
▸ Select
Interval Shooting
▸ Select
Interval
▸ Enter the desired value
SETTING THE DELAY TIME
▸ Select in the main menu
Drive Mode
▸ Select
Interval Shooting
▸ Select
Countdown
▸ Enter the desired value