Interval Shooting - Leica CL Instruction Manual

EN
Notes
• We recommend deactivating the preview review mode
(
Auto Playback/Review
• The specified picture sequence stated in the technical
information refers to a default setting (
The picture sequence may differ in conjunction with other
settings or depending on the picture content,
setting and the memory card used.
• Regardless of how many pictures were taken in a series, the last
picture in the series or the last picture saved on the memory
card while the save process is ongoing will be displayed first in
both review modes.
• Serial exposures with
frequency of max. 10 fps1, provided shutter speeds of 1/60 s or
faster are used.
• Serial exposures are not possible if a flash is used. Only a single
picture will be taken if the flash function is activated.
• Serial exposures are not available in combination with the
self-timer function.
• The exposure frequency will slow down after a series of max. 33
exposures (
DNG + JPG
to transfer the data from the buffer memory to the card.
mechanical/electronic shutter
1
92
) when using this function.
, JPG format
ISO 200
White Balance
set are taken at a
Continuous High Speed
). This slow-down is due to the time required

INTERVAL SHOOTING

This camera allows you to capture motion sequences over
extended periods of time automatically using the interval shooting
function. You specify the number of pictures, the intervals between
).
L-JPG
pictures, and the start time of the series.
The exposure and focus settings are no different from those for
normal pictures, but you should remember that the lighting
conditions may change during the course of the picture series.
SPECIFYING THE NUMBER OF PICTURES
▸ Select
Drive Mode
▸ Select in the submenu
Interval
▸ Select
Frames
▸ Enter the desired value
SPECIFYING THE INTERVALS BETWEEN SHOTS
▸ Select
Drive Mode
▸ Select in the submenu
Interval
▸ Select
Interval
▸ Enter the desired value
SETTING THE DELAY TIME
▸ Select
Drive Mode
▸ Select in the submenu
Interval
▸ Select
Countdown
▸ Enter the desired value
in the main menu
in the main menu
in the main menu