Set Up Ip Filtering - Arris SURFboard SBG10 User Manual

3. Select the Enable Parental Controls checkbox to turn ON Parental Controls on your home
network.
4. Enter the 12-digit (hexadecimal) Trusted MAC addresses of any connected computers on
your home network in the Trusted MAC Addresses fields and then click Apply.
Repeat for each additional MAC address that you want to add.
5. Click Add under Keyword Filtering to add any websites or keywords that you want to
block. The Add Keyword Filter dialog box opens.
6. Enter the keyword for the filter you are creating in the Keyword field.
7. Select the day(s) and time that you are setting for the filter.
8. Click AddKeywordFilter to save the filter.
9. Click Apply, when you are finished.

Set up IP filtering

You can use IP Filtering to set up Internet access restrictions on specific network devices on
your home network using their IP addresses. You will have to create IP address filters that
contain the starting and ending IP address range for each device that you want to block
Internet access.
To configure IP filters:
1. From any web manager screen, click the Firewall menu button on the SBG10 Web
Manager main menu bar.
2. Click CLIENT IP FILTERS from the Firewall submenu options list to display the Client IP
Filters Configuration screen.
PN 365-095-32809 x.1
Copyright 2018, ARRIS Enterprises, LLC. All rights
Chapter 8: Protecting & monitoring your Wi-Fi network
Figure 48: SBG10 Add Keyword Filter Screen
reserved.
SURFboard SBG10 Wi-Fi Cable Modem User Guide
54