Arris SURFboard SBG10 User Manual page 45

Start the WPS pairing process with your WPS-enabled computer or other WPS-enabled
client device that you want to connect to your Wi-Fi network.
•
PIN Code – Enter the WPS PIN code (numeric password) listed in the Device PIN Code
field.
7. Click BASIC from the Wireless submenu option you are setting up.
8. Select the Enable Wireless checkbox to turn ON Wi-Fi networking on your home network.
- or -
Deselect the Enable Wireless checkbox to turn OFF Wi-Fi networking on your home
network.
9. Do one of the following to set the network name or SSID (Service Set Identifier) for your
Wi-Fi network in the Wireless Network Name (SSID) field:
•
Keep the default network name listed in the network name field (also listed on the
Wi-Fi cable modem label).
•
Enter a new network name for your Wi-Fi home network.
The Wi-Fi network name cannot be the same name as any other SSID on your home
network. You can use any combination of letters (lowercase and uppercase), numbers,
and/or special characters (symbols) up to a maximum of 32 characters.
PN 365-095-32809 x.1
Copyright 2018, ARRIS Enterprises, LLC. All rights
Figure 42: SBG10 5 GHz wireless network screen
reserved.
Chapter 7: Configuring your Wi-Fi network
SURFboard SBG10 Wi-Fi Cable Modem User Guide
45