Table of Contents
Advertisement
3.
INSTALLATION
3.1
Unpacking
D Check whether the machine is complete. The contents of the packaging consist of:
– 1 FreshOne hot drinks machine
– 1 drip–tray (complete with drip–tray plate)
– 1 water connection hose
– 1 water hose (for descaling)
– 1 roll of filter paper (200 measures)
– 1 sachet of CLEANER
– 1 sachet of RENEGITE descaler
– 1 funnel (for descaling)
– 1 tool for turning the Brewer
– 1 brush for cleaning places in the machine that are difficult to reach
– 1 scrubbing brush for cleaning the ingredients container
– 1 service key
– 2 door keys
– 2 keys for till (only with coin mechanism)
– This manual
– manual coin mechanism (only with coin mechanism)
D Please contact your dealer if components are missing or damaged.
3.2
Installation
D Place the machine on a flat (max. 5_ off
plumb), sufficiently solid surface near a water
connection point (and if possible a water
discharge) and an electricity connection point
that is earthed.
D Leave sufficient space for maintenance and
repair purposes at the back and front of the
machine.
D Leave a space of at least 5 cm at the left side
of the machine for ventilation!
D Connect the machine to a readily accessible
manually operated water tap, so that the water
supply can easily be turned off. Use the water
connection hose provided for this.
D Open the tap.
D Open the door (3.) on the left side with the key.
D Remove the polystyrene transportation block
between the Brewer (24.) and the upper and
lower sides of the ingredients container (26.).
ECopyright Bravilor Bonamat B.V.
WARNING
n Power supply voltages vary from one country
to another. Ensure that the machine is
suitable for connecting to the local power
supply. Details on the required supply voltage
and frequency can be found on the
identification plate.
Follow the instructions below to install another
language with drink names:
D Remove the window (4.) with the name plate.
– Press the plastic lips of the window from the
inside of the machine to the outside.
– Remove the window and the name plate.
D Place the multilingual, double–sided leaf with
drink names behind the name plate. Now you
can read the drink names in the required
language through the openings.
D Remount the window with the name plate.
D Connect the plug to the power socket.
D Close the door.
3
version
1.0
Hide quick links:
Advertisement
Table of Contents
