Configure Cellular Modem Apns - Digi IX14 User Manual

Hide thumbs Also See for IX14:

Table of Contents

Initial configuration

Configure cellular modem APNs

The IX14 device uses a preconfigured list of Access Point Names (APNs) when attempting to connect

to a cellular carrier for the first time. After the device has successfully connected, it will remember the

correct APN. As a result, it is generally not necessary to configure APNs. However, you can configure

the system to use a specified APN.

To configure the APN:

1. Log into the IX14 WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

3. Click Network > Interfaces > Modem > APN list > APN.

4. For APN, type the Access Point Name (APN) to be used when connecting to the cellular carrier.

5. (Optional) IP version:

For IP version, select one of the following:

IX14 User Guide

Configure cellular modem APNs