Hardware setup
7. Affix the cellular antennas to the two connectors protruding from the device.
To remove the CORE modem:
1. Remove the anchor screw.
2. Pinch the two vertical sides of the white clip.
3. Slide the CORE modem out of the IX20 device.
Tips for improving cellular signal strength
If the signal strength LEDs or the signal quality for your device indicate Poor or No service, try the
following things to improve signal strength:
Move the device to another location.
n
Try connecting a different set of antennas, if available.
n
Purchase a Digi Antenna Extender Kit:
n
Connect data cables
The IX20 provides two types of data ports:
Ethernet (RJ-45): Use a Cat 5e or Cat 6 Ethernet cable.
n
Serial (9-pin RS-232): Use a serial cable with a 9-pin RS-232 connector.
n
Mount the IX20 device
There are three options for mounting the IX20 device:
Attach to a mounting surface by using the two mounting
n
Attach to DIN rail with
n
Attach to DIN rail with
n
IX20 User Guide
Antenna Extender Kit,
clip.
bracket.
Connect data cables
1m.
tabs.
32