Digi IX14 User Manual page 274

System administration
iv. (Optional) Enable mDNS. mDNS is a protocol that resolves host names in small
networks that do not have a DNS server.
(config serial USB_port)> service ssh mdns enable true
(config serial USB_port)>
8. Configure TCP access to this port:
CAUTION! This connection is not authenticated or encrypted.
a. Enable TCP access:
(config)> serial port1 service tcp enable false
(config)>
b. Set the TCP port:
(config)> serial port1 service tcp port port
(config)>
c. (Optional) Configure the access control list to limit access to the TCP connection:
IX14 User Guide
To limit access based on firewall zones:
n
(config serial USB_port)> add service ssh acl zone end value
Where value is a firewall zone defined on your device, or the any keyword.
Display a list of available firewall zones:
Type ... firewall zone ? at the config prompt:
(config serial USB_port)> ... firewall zone ?
Zones: A list of groups of network interfaces that
can be referred to by packet
filtering rules and access control lists.
Additional Configuration
--------------------------------------------------
-----------------------------
any
dynamic_routes
edge
external
internal
ipsec
loopback
setup
(config serial USB_port)>
Repeat this step to list additional firewall zones.
Serial port
274