Lock Up / Operation - Yetter 5000 Series Owner's Manual & Parts List

To "lock up" Devastator rollers, lower head down & install a rod through hole in mount bracket in front of pivot arms. A 5000-
430 Lock Pin can be ordered separately to lock up devastator rollers. 6 row heads require 1 lock pin, 8/12 row heads require 2,
18 row heads require 3.
CORN HEAD ANGLE NEEDS TO BE ADJUSTED BETWEEN
23 – 25° FOR OPTIMUM DEVASTATATOR PERFORMANCE.
USE THE 5000-455 TO CHECK CORN HEAD ANGLE:
- Put the combine on a level surface. Lower the
Corn head to your normal working head height.
- Place the magnetic protractor on the stripper
plate to get the angle. Adjust the feeder house
as needed, fore or aft, to achieve 23 – 25 degrees.
- Adjust the snouts to raise/lower head to preferred head height.
15
LOCK UP
OPERATION