BELOW ARE RECOMMENDED LOCATIONS OF THE TORSION PIVOT ASSEMBLY, ALTERNATE LOCATIONS MAY BE USED IF INTERFERENCE OCCURS!
Arrows indicate 5000-167/5000-174 Torsion Pivot locations – Geringhoff models must use a gearbox
Arrows indicate 5000-167/5000-174 Torsion Pivot locations – Geringhoff models must use a gearbox
5000-042, 5000-042CNHA, & 5000-042GER 12 ROW 20"
Arrows indicate 5000-167/5000-174 Torsion Pivot locations – CNH & Geringhoff models must use a gearbox
Arrows indicate 5000-167/5000-174 Torsion Pivot locations – Geringhoff models must use a gearbox
10
ASSEMBLY INSTRUCTIONS
5000-040 & 5000-040GER 6 ROW 30"
5000-041 & 5000-041GER 8 ROW 30"
5000-044 & 5000-044GER 12 ROW 30"
*On Rows 3 and 10, 1 set of M16 Bolts will thread into the gear box*