Table of Contents
Advertisement
FLOW MEASUREMENT
1. Connect the flow source to the Input of the
2. Select the desired GAS, by pushing the
3. Push the F4 key to select the desired unit
DIGIFLOW 2000 USER MANUAL REV 0
Turn off the flow supply before
connecting it to Digiflow 2000.
Observe correct orientation with
respect to input/output.
flow sensor (marked on the top left-hand
side).
F1 key. The Gas selected will display on
the screen.
The available Gas selections are as
follows.
• Air, O2, N2, Co2, ARG and N2O.
of measurement.
The available units are as follows:
• SCCM (Standard Cubic Centimeter per
Minute).
• SCFM (Standard Cubic Feet per Minute)
• LpM (Liter per Minute).
17
Advertisement
Table of Contents
