Advertisement
APPENDIX A – TECHNICAL REFERENCE & TROUBLESHOOTING
connectors or as two pins (one input and one output) when using the MON08
cable.
When using the PROG08SZ programming software, the MCU's FLASH/
EEPROM memory can be programmed. Socket XU1 supports the 64-pin QFP
version of the part. The ICS08AB also supports in-circuit programming of
either version of the part through the MON08 cable.
The ICS08AB board also provides +5 Vdc power, +8.0 Vdc power for the
V
voltage required to enter monitor mode, a 4.9152-MHz clock signal, and
TST
host PC RS-232 level translation.
M68ICS08ABUM/D
A-3
Advertisement
