Servicing At The End Of The Season - P.Lindberg Talex EcoCut 135 Original Manual

Table of Contents

Advertisement

Available languages

Available languages

To ensure correct operation of the gearbox:
I.
Check the oil level after every ten hours of operation. Insert a clean dipstick in the vent
opening: the oil level must be between min. 20 mm and max. 30 mm.
II.
Change the oil at the end of every season.
Oil volume required for the gearbox:
Model 1.35: ~ 3.5 litres
Model 1.85: ~ 5 litres
Model 1.65: ~ 4 litres
The manufacture recommends the following oil: 80W90 SAE + multi-purpose grease
In the event that the oil level becomes too low, localise and repair the leak and
replenish with the required amount of oil.

Servicing at the end of the season

In addition to the workflows described in the section "Maintenance after use".
After use, store the mower under cover on a level, hard surface, resting on the
stabiliser.
Check painted surfaces for cracks in the paint. In the event of damage, clean the
damaged area and paint with a new coat of protective paint.
Loosen the drive belts. Remember to retighten when the mower is put back into
operation.
In the event of leaks from the hydraulic system, replace damaged parts
and components to prevent environmental pollution.
Replace hydraulic hoses every five years, regardless of condition.
P. Lindberg A/S
Tel.: +45 7021 2626
34
Sdr. Ringvej 1
DK-6600 Vejen
MAN 9054233_9054739_9058170 EN V3
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents