Operation And Maintenance - P.Lindberg Talex EcoCut 135 Original Manual

Operation and maintenance

All requisite workflows can be carried out by the tractor driver, provided that he/she is
authorised to drive the tractor.
After use, store the mower under cover on a level, hard surface, resting on
the stabiliser.
Before putting the mower into operation, always check the mower's condition and
prepare it for operation:
Read the manual and follow its guidelines.
•
Learn and understand how the mower works.
•
Visually inspect the mower, checking for mechanical damage.
•
Lubricate the mower as recommended.
•
Inspect linkage bolts and cotter pins.
•
Check the oil level in the gearbox.
•
Check the tightness of drive belts.
•
• Check bolted joints.
Inspect the condition of cutting blades.
•
Use original spare parts only to guarantee safe reliable mower operation.
If unoriginal parts are used or if spare parts are repaired, the guarantee
will no longer apply.
When all of the above-mentioned workflows have been carried out and the operator
assesses that mower does not have any faults or deficiencies, couple the mower to
the tractor as described in the previous section "Mounting on tractor".
P. Lindberg A/S
Tel.: +45 7021 2626
29
Sdr. Ringvej 1
DK-6600 Vejen
MAN 9054233_9054739_9058170 EN V3
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk