Restoring The Configuration Files - Nortel Secure Router 8000 Series Routine Maintenance

Nortel Secure Router 8000 Series
Routine Maintenance

3.2.2 Restoring the configuration files

You can restore the configuration files through the following ways.
Recovering the configuration files saved in the flash memory
This action restores the configuration files you saved in the flash memory of the router as the
configuration files of the current system.
Run the following commands when the router works normally.
<Nortel> copy backup.zip Flash:/vrpcfg.zip
Copy Flash:/backup.zip to Flash:/vrpcfg.zip?[Y/N]:y
100% complete
Info: Copied file Flash:/backup.zip to Flash:/vrpcfg.zip...Done
Recovering the configuration files saved in the PC through TFTP
The router works as the TFFP client. The restoration procedure is similar to that for backing
up the configuration files through TFTP. Run the tftp get command to download the
configuration files saved in the PC to the Flash memory of the router.
Recovering the configuration files saved in the PC through FTP
The router acts as the FTP server. The restoration procedure is similar to that for backing up
the configuration files through FTP. Run the ftp put command to upload the configuration
files saved in the PC to the Flash memory of the router.
Issue 5.3 ( )
19 May 2009
After restoring the configuration files, reset the router to make the configuration files take effect.
Nortel Networks Inc.
3 Maintenance guidelines
3-9