Ce Marking Notes; Revision Information; Documentation Conventions - Pro-face GP-2300 Series User Manual

Preface

CE Marking Notes

The GP2300-LG41-24V, GP2300-TC41-24V, GP2301-LG41-24V, GP2301-SC41-
24V and GP2301-TC41-24V are CE marked products that conform to EMC
directives EN55011 Class A and EN61000-6-2.
For detailed CE marking information, please contact your local GP distributor.

Revision Information

Revision information can be found on your GP unit's rear-face Pro-face label. The
bottom-most [REV] row's asterisk (*) mark indicates the Revision character.
In the example shown below, the asterisk indicates that this unit's Revision char-
acter is "D".

Documentation Conventions

The list below describes the documentation conventions used in this manual.
Screen
12
Symbol
Indicates important information or procedures that must be followed for
correct and risk-free software/device operation.
Indicates the Pro-Designer (version 4.0 or higher).
Editor
Abbreviation for Programmable Logic Controller.
PLC
Indicates useful or important supplemental information.
*1
Indicates steps in a procedure. Be sure to perform these steps in the
1) , 2)
order given.
Provides useful or important supplemental information.
Refers to useful or important supplemental information.
DIGITAL ELECTRONICS CORP.
Meaning
GP-2300/2301 Series User Manual