08 | Keysight | Using an External Trigger to Measure Current with B2980A Series – Demo Guide
4. (Optional) Configure voltage source condition
The B2987A has an internal voltage source. This demo makes use of it to source voltage
across the resistor and induce current across it.
to select the Voltage source and press
1) Rotate
2) Then rotate
until the Voltage Source value reaches 1 V and press
3) Press Voltage Source
5. Initiate the ammeter to wait for an external trigger signal
1) Press Ammeter
2) Press
,
ready to receive an external trigger signal.
to enable Voltage Source.
to enable Ammeter
,
, and then press
to edit it.
to fix it.
to make the ammeter
(1) Press System Menu
(2) Press Trigger
(3) Press Initiate
(4) Press Acq.