Keysight Technologies B2980A Series Demo Manual page 7
Using an external trigger to measure current with femto/picoammeter and electrometer/high resistance meter
Hide thumbs
Also See for B2980A Series:
- Configuration manual (12 pages) ,
- Technical overview (24 pages)
Advertisement
07 | Keysight | Using an External Trigger to Measure Current with B2980A Series – Demo Guide
to edit the Input Polarity, and then press
8) Press
9) Press
to make save your settings.
10) Rotate
to select the Measure trigger count and press
the Number of trigger signals which will be sent to the instrument as the Measure trigger
count.
11) Or press
to set it to INFINITY if you'd like to continue to measure current until it
is aborted.
If you set the trigger count to INFINITY, be sure you abort the process at the end of the
test.
to set it to Positive polarity.
to edit it. Then enter
Advertisement
