Keysight Technologies B2980A Series Demo Manual page 11

11 | Keysight | Using an External Trigger to Measure Current with B2980A Series – Demo Guide
8. (Optional) If you'd like to change the measurement range operation
The current measurement range operation is set to AUTO in the default settings. When
the operation is set to AUTO, an appropriate current measurement range is selected
automatically by the instrument depending on the current measurement result. If the
mode is set to FIXED, the current measurement range is fixed to the one specified by the
user during the measurement.
to hide Trigger Parameters.
1) Press
to set the current measurement range operation to FIXED.
2) Press
3) Press the measurement navigation key
measurement range.
4) Press the measurement navigation key
measurement range.
to select a larger current
to select a smaller current