Table of Contents
Advertisement
Brightness bar
Temperature bar
BRIGHTNESS:
Brightness level
Above the hysteresis frame
Below the hysteresis frame
Within the hysteresis frame
Below the twilight threshold*
* optional
**
The motor automatically sets the movement based on the type of device memorised
To enable the automation again after complete closing, the blinds/venetian blind must
be opened so that the sensor is again exposed to light up to a point that falls within the
hysteresis frame.
TEMPERATURE:
Management of events linked to temperature is associated with the Season Option setting
(see Programming/Season Option page 35).
SUMMER (sun)
Temperature level
Above the threshold
Below the threshold
WINTER (snowflake)
Temperature level
Above the threshold
Below the threshold
In AUTOMATIC mode it is always possible to control the motor manually with the A, B and
C buttons. This movement disables automatic operation for a time that may be set by the
user (see "Setting the Automatic Disable time", page 36). During this time the "red hand"
symbol is displayed on the screen.
Automatic
08:00/17:00
Brightness: 0135
Temperature: 20 °C
Thresh./Main menu
Quick start
Motor command
DOWN
UP
No command or STOP (if in
movement)
DOWN (blinds/venetian blinds)
UP (awnings)
until they are completely closed
Motor command
DOWN
No command
Motor command
UP
No command
32
Brightness hysteresis
intervention threshold
Effect
Less light
More light
Mantains the current brightness level
)**
Close the blinds/awnings completely
Disable the automation
Disable the temperature sensor
(if active)
Effect
Less light
Less heat
Blocks light sensor management, if active
Maintains the current temperature level set
Light sensor is managed by settings
Effect
More light
More heat
Blocks light sensor management, if enabled
Maintains the current temperature level set Light
sensor is managed by settings
Twilight threshold
frame
Temperature
Advertisement
Table of Contents
