Datapath VSN Series Quick Start Manual page 17

VSNMicro 600 Quick Start Guide
STEP 9 CREATE A RESTORE USB FLASH DRIVE
To create your Restore USB Flash Drive you will need a USB memory stick with a
minimum capacity of 16GB. It is recommended that once your restore flash drive has
been created, it is stored in a safe place accessible to personnel who may be required
to restore the system.
You will need to boot into the Windows Restore portal to begin the process of creating
your Restore USB Flash Drive.
Switch on your machine and when the boot messages display the Choose an
operating system screen, use the cursor keys to select Windows Restore as shown in
the following dialogue.
It should be noted that the dialogue is only displayed briefly, approximately 3 seconds.
This will lead you to the Windows 10 Restore Menu as shown below:
17