Replacing The Water Inlet Or Outlet Temperature Sensor - Huawei NetCol5000-C030H90D0 User Manual

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual (2019)
Step 6 Reconnect the waterproof connector to the sensor cable.
Step 7 Close and lock the front door.
----End

6.4.8 Replacing the Water Inlet or Outlet Temperature Sensor

Prerequisites
●
●
Context
Temperature sensors can be replaced with power-on.
Recommended tools: utility knife, needle-nose pliers
Preparation: Maintain from the rear door.
Procedure
Step 1 Tap Shutdown on the LCD home screen.
Exercise caution because the device is still energized after it is shut down on the
LCD.
Step 2 Open the rear door and remove the air filter.
Step 3 Cut off the thermal insulation foam on the pipe where the sensor is secured.
Step 4 Use the needle-nose pliers to clip out the spring tongue fastening the water inlet
or outlet temperature sensor, and remove the sensor probe.
Figure 6-13 Position of water inlet or outlet temperature sensor (NetCol5000-
C065)
Issue 03 (2020-08-30)
The water inlet or outlet temperature sensor needs to be replaced.
A spare temperature sensor of the same model is available and functional.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
157