Huawei NetCol5000-C030H90D0 User Manual page 11

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual (2019)
●
●
●
●
●
●
●
●
●
Personal Safety
●
Issue 03 (2020-08-30)
All cable holes should be sealed. Seal the used cable holes with firestop putty.
Seal the unused cable holes with the caps delivered with the cabinet. The
following figure shows the criteria for correct sealing with firestop putty.
Do not scrawl, damage, or block any warning label on the equipment.
Tighten the screws using tools when installing the equipment.
Do not work with power on during installation.
Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches cannot be exposed
to an outdoor environment for a long period of time.
Before operations, ensure that the equipment is firmly secured to the floor or
other solid objects, such as a wall or an installation rack.
Do not use water to clean electrical components inside or outside of a
cabinet.
Do not change the structure or installation sequence of equipment without
permission.
Do not touch a running fan with your fingers, components, screws, tools, or
boards before the fan is powered off or stops running.
If there is a probability of personal injury or equipment damage during
operations on the equipment, immediately stop the operations, report the
case to the supervisor, and take feasible protective measures.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
3