Positioning; Features - Huawei NetCol5000-C030H90D0 User Manual

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual (2019)

2.2 Positioning

With the rapid development of data centers, power consumption of core
equipment in a traditional equipment room has risen from 3-5 kW per cabinet to
10 kW per cabinet. This brings challenges of heat dissipation, energy saving, and
environment protection to the current cooling system.
Huawei has developed the in row cooling product for new-generation data
centers. Huawei has developed the in row cooling product for new-generation
data centers. The in row cooling product can be deployed with standard cabinets
in use currently. The in row cooling product dissipates the heat generated by high-
density equipment in a data center, reduces power consumption on cooling, and
increases power usage efficiency (resulting in a lower PUE value).
The in-row cooling product is a high-heat-flux cooling solution that applies to
high-density data centers or overheated areas in common data centers. High-
heat-flux cooling solutions are classified into water-based or non-water-based
solutions depending on the cooling medium. The in row cooling product is a
water-based solution.

2.3 Features

The NetCol5000-C features efficient refrigerating, optimal reliability, high
compatibility, intelligent monitoring, quick installation and commissioning, and
easy maintenance.
Efficient Refrigerating
●
●
●
●
High Reliability
●
●
●
Issue 03 (2020-08-30)
The highly efficient EC fan saves more than 30% of energy than a common
fan.
Chilled water valves are used to control incremental PID parameters with
precise adjustment and accurate control.
Intelligent differential pressure control (optional): Saves energy compared
with the control mode of a normal fan.
Wet film humidifier (optional): Lowers water quality requirements and
supports a long replacement interval, and saves energy by over 95%
compared with a traditional electrode humidifier.
Teamwork control: Enables smart cooling products to work in turn to avoid
competitive operating and supports dynamic cooling capacity allocation and
backup of the main control system.
Dual power supplies: When the active power supply fails, the standby power
supply takes over automatically. When the active power supply is recovered,
the power supply is automatically switched back to the active power supply.
Dual power supplies: When the active power supply fails, the standby power
supply takes over automatically. When the active power supply is recovered,
the power supply is automatically switched back to the active power supply.
Copyright © Huawei Technologies Co., Ltd.
2 Product Description
13