Henny Penny 500 Operator's Manual page 43

3-5. FRYING PROCEDURE
(Continued)
703
21. After the pressure drops to zero, turn the spindle
counterclockwise approximately one turn.
Do not spin or flip the spindle cross arm when opening the
lid. Damage to the acme nut inside the crossbar could
result.
22. Raise the lid promptly to allow most of the condensation on the
lid to drain down and out through the drain channel and not
back into the shortening.
To avoid damage to the hinge, do not let the lid slam up
against its backstop.
23. Insert the handle into the basket. Lift the basket and hang it on
the side of the frypot to drain. Allow the product to drain
approximately 15 seconds before dumping it onto a tray.
24. Place the product into a warming cabinet immediately.
Step 23
25. Before frying the next load, wait until the TEMPERATURE light
goes off, indicating the shortening has reheated.
Model 500/561/600
3-15