Startup And Shutdown - Vitek TRANSCENDENT VT-TNR818TPH Manual

8 channel 8 megapixel (4k) real time poe advanced a.i. network video recorder with temperature measurement

Table of Contents

START-UP AND SHUTDOWN

► Startup

① Connect the monitor and the power.

② The device will boot and the power indicator will display in blue.

③ A wizard window will pop up.

► Shutdown

Click "Start" and select the "Shutdown" icon. This will bring up a shutdown window.

The device will shut down by clicking the "OK" button. Then disconnect the power.

You must configure the wizard when you start the NVR for the first time. Choose the

language and read the privacy statement. Then set the data, time and zone as needed.

After that, set the login password.

The default username is 'admin' and the default password is 123456. Set your own

password or use the default one when you use the wizard for the first time. Enable

pattern lock and click "Edit" to set the pattern lock. Then set the security

questions and answers. It is important for you to remember these answers, or you

will not be able to reset your password. Click "Next" to continue.

Table of Contents