FI‐7600/FI‐7700
Cleaning the ADF (with Cleaning Paper)
The ADF can be cleaned with a sheet of Cleaning Paper moistened with Cleaner F1.
As the scanner continues to feed the documents, paper dust will accumulate inside the ADF
and may cause scanning errors.
Cleaning should be performed approximately every 10,000 sheets scanned. Note that this
guideline varies depending on the types of documents you scan For instance, it may be
necessary to clean the scanner more frequently when you scan documents on which the toner
is not sufficiently fused.
Attention
• Do not use water or mild detergent to clean the ADF.
• It may take a long time to dry if an excessive amount of Cleaner F1 is used. Use it in
small quantity.
1.
Turn on the scanner.
The [ready] screen is displayed on the LCD.
2.
Press the [Menu] button.
The [Settings Menu] screen is displayed on the LCD.
3.
Press the [ ] or [ ] button and select [2: Cleaning], then press the [Scan/Enter] button
to confirm.
The [Cleaning] screen is displayed on the LCD.
4.
Select [1: Cleaning Paper] by the [ ] or [ ] button, and press the [Scan/Enter] button
to confirm.
A message is displayed on the LCD.
C
R
ONSUMABLE
EPLACEMENT AND
Cleaning the Inside
C
I
LEANING
NSTRUCTIONS
CG00002 ‐ 296501