Table of Contents
Advertisement
FI‐7600/FI‐7700
The outside of the scanner, including the ADF paper chute (feeder) and the stacker, should be
cleaned with either a piece of dry cloth, a cloth moistened with Cleaner F1/mild detergent, or a
sheet of Cleaning Wipe.
Attention
To avoid deformation and discoloration, never use paint thinner or any other organic solvents.
Be careful not to let moisture or water inside the scanner during cleaning.
It may take a long time to dry if an excessive amount of Cleaner F1/mild detergent is used.
Use it in small quantity. Wipe off the cleaner completely to leave no residue on the cleaned
parts.
C
R
ONSUMABLE
Cleaning the Outside
C
EPLACEMENT AND
LEANING
I
NSTRUCTIONS
CG00002 ‐ 296501
Advertisement
Table of Contents
