FI‐7600/FI‐7700
Checking and resetting sheet counters
Checking the sheet counters
The status of each consumable can be
viewed to determine when to replace or
clean the consumables.
The color of the counter gradually changes
when a replacement for a consumable is
needed or when cleaning is needed.
The color of each counter changes as
follows:
Brake roller counter/pick roller counter
These counters turn light yellow when the sheet
count after the consumable replacement reaches
95% of the value specified in
"Replacement Cycle of Consumables
[Life Counter Alarm Setting]"
in the Software Operation Panel, and turn yellow
when the sheet count reaches 100%
.
Counter after cleaning
This counter turns yellow when the sheet count
after cleaning reaches the value specified in
"Scanner Cleaning Cycle [Cleaning Cycle]"
Software Operation Panel.
Ink counter
This counter turns yellow when the amount of
remaining ink reaches below 33% (only displayed
when the imprinter is installed).
C
R
ONSUMABLE
EPLACEMENT AND
1.
2.
In this window, you can check the following
items:
in the
C
I
LEANING
NSTRUCTIONS
Start up the Software Operation Panel
From the listing on the left, select
[Device Setting]
CG00002 ‐ 296501