FI‐7600/FI‐7700
Brake Roller (× 2)
Remove the roller from the scanner.
Gently wipe off any dirt or dust along the grooves, taking care not to damage the roller
surface.
Pick Roller (× 5)
Gently wipe dirt and dust off the roller surface (and along the grooves if it has grooves) as
you rotate the roller by hand, taking care not to damage the roller surface. Make sure that
it is wiped properly because black residue on the roller will affect the feeding performance.
Rubber Roller (× 4)
Gently wipe off any dirt or dust on the surface of the roller. Make sure that it is wiped
properly because black residue on the rollers will affect the feeding performance.
Be careful not to damage the sponge that is attached to the roller.
Chute Roller (× 1)
With the chute roller cover open, gently wipe off any dirt or dust on the surface of the
roller. Make sure that it is wiped properly because black residue on the roller will affect the
feeding performance.
C
ONSUMABLE
R
C
EPLACEMENT AND
LEANING
I
NSTRUCTIONS
CG00002 ‐ 296501