FI‐7600/FI‐7700
11
. Install the new pick roller in the side
closer to you.
a. Insert the protrusion (x2) on the
scanner into the hole (x2) on the pick
roller.
b. Slide the bushing on the left shaft in
the direction of the arrow.
C
ONSUMABLE
R
C
EPLACEMENT AND
LEANING
c. Fit the protrusion on the right shaft into
the notch on the pick roller and slide the
bushing on the right shaft in the direction of
the arrow.
d. Rotate the bushing (x2) on the shaft in the
direction of the arrow.
I
NSTRUCTIONS
CG00002 ‐ 296501