FI‐7600/FI‐7700
Resetting the sheet counters
When you have replaced or cleaned a consumable part, reset the corresponding counter by
using the following procedure:
1.
If you have replaced a consumable, click the [Clear] button of the consumable that
you replaced. If you performed cleaning, click the [Clear] button for [After cleaning].
The counter is reset to 0
For the Ink counter, the value will be set to 100
2.
Click the [OK] button.
A confirmation message appears.
3.
Click the [OK] button.
The settings are saved
C
R
ONSUMABLE
EPLACEMENT AND
C
I
LEANING
NSTRUCTIONS
CG00002 ‐ 296501