FI‐7600/FI‐7700
9
. Attach new pick rollers (x2) on the shaft,
one at a time.
The Software Operation Panel is installed together with the PaperStream IP driver.
a. Hold the bushing of the shaft in one hand
This application allows you to configure various settings such as the operation of the scanner
and the pick roller with the retaining clip
and management of the consumables.
facing toward you in the other hand, and
then put the pick roller on the shaft in the
direction of the arrow 1 . If you rotate the
pick roller in the direction of the arrow 2 ,
you can put it on the shaft more easily.
1. Confirm that the scanner is connected to the computer, then turn on the scanner.
2. Display the [Software Operation Panel] Window
b. Hold the bushing of the shaft in one hand
*Windows Vista/Windows 7/Windows Server 2008
and the other pick roller with the retaining
Click [Start] menu
clip facing towards you in the other hand,
and then put the pick roller on the shaft in
*Windows Server 2012/Windows 8
the direction of the arrow 1 . If you rotate
Right‐click the Start screen, and select [Software Operation Panel] under [SP Series]
the pick roller in the direction of the arrow 2
, you can put it on the shaft more easily.
*Windows 2012R2/Windows 8.1
Click [ ] on the lower left side of the start screen and select [Software Operation Panel]
under [SP Series]
*Windows 10
Click [Start] menu
C
R
ONSUMABLE
EPLACEMENT AND
[All Programs]
[All Apps]
[SP Series]
C
LEANING
10
. Install the shaft of the pick roller in the
side away from you.
a. Insert the left end of the shaft into the
slot, and lower the other end gradually.
b. Rotate the bushing on the shaft in the
direction of the arrow.
[SP Series]
[Software Operation Panel].
[Software Operation Panel].
I
NSTRUCTIONS
CG00002 ‐ 296501