Regency City ACV40E Series Owners & Installation Manual page 60

CITY SERIES
installation
7.
Install venting before proceeding (see unit manual for details).
Install venting
8.
Finish the wall with desired fi nishing material and install rear
enclosure venting (see manual for fi nishing/venting require-
ments).
Finish wall
9.
Finish up to the dashed line on the base part—DO NOT fi nish
past this line.
| ACV40E City Series
60
920-113
Finish to the dashed
line only
NOTE: Remove side liner panel and extended view panel to access
fi rebox.
Base panel with fi nishing
2
10. Install inner panels (refer to instructions in unit manual).
Install inner panels
11. Install glass panels onto base panels (glass panels are se-
cured in place with magnets).
Install glass panels
12. Glass panels should overlap with outer side liner panel as
shown below.
Correctly installed glass panels
06.05.19