Electrical Safety Guidelines; Power Supplies; Cabling; Protective Earth - Nokia FastMile Installation Manual

ETSI safety guidelines

3.3 Electrical safety guidelines

This section provides the electrical safety guidelines for the Nokia FastMile 4G
Receiver equipment.
3.3.1
The use of any non-Nokia approved power supplies or power adapters is not
supported or endorsed by Nokia. Such use will void any warranty or support contract
with Nokia. Such use greatly increases the danger of damage to equipment or
property.
3.3.2
The following are the guidelines regarding cables used for the Nokia FastMile 4G
Receiver equipment:
•
•
•
3.3.3
Earthing and bonding of the Nokia FastMile 4G Receiver equipment must comply
with the requirements of local electrical codes.
26
The Nokia FastMile 4G Receiver equipment complies
Note 1 —
with the U.S. National Electrical Code. However, local electrical
authorities have jurisdiction when there are differences
between the local and U.S. standards.
The Nokia FastMile 4G Receiver equipment complies
Note 2 —
with BS EN 61140.

Power supplies

Cabling

All cables must be approved by the relevant national electrical code.
Cables for outdoor connection to the Nokia FastMile 4G Receiver equipment must
be suitable for outdoor use.
The Nokia FastMile 4G Receiver equipment must be used with the cabling
supplied with the equipment.

Protective earth

3TG-00387-AADA-TCZZA
Nokia FastMile 4G Receiver Installation Guide
Issue: 02 DRAFT