Determining the mounting location
12
58
The Nokia Wireless app uses the signal strength measurement capability of the Nokia
FastMile 4G Receiver to help you find a place to mount the Nokia FastMile 4G Receiver.
The Nokia Wireless app provides the following screens to help you find a place to mount the
Nokia FastMile 4G Receiver based on signal strength measurements:
•
swipable information screen that tells you to:
•
find a location where the Nokia FastMile 4G Receiver won't be obstructed (shown in
Figure 38)
•
hold the Nokia FastMile 4G Receiver in place and keep it steady (shown in Figure 39)
•
try a few locations to find the best signal (shown in Figure 40)
•
screen that starts a signal strength measurement by the Nokia FastMile 4G Receiver; you
start a measurement by tapping "Measure Signal"; measurements can take up to five
minutes (shown in Figure 41); for a Compact multi-band model, the signal strength LEDs
will light
•
screen that shows a signal strength measurement in progress; you must wait for the
measurement to finish
•
screen that shows a signal with average strength, with a recommendation that you take
another measurement
•
screen that shows a signal with strong strength, with an indication that this is a good place
to install
•
screen that shows a signal with very strong strength, with an indication that this is a good
place to install (shown in Figure 42)
•
screen that shows no signal, with a recommendation that you take another measurement
When you have a signal strength measurement that is satisfactory, proceed by tapping on
"Done".
3TG-00387-AADA-TCZZA
Nokia FastMile 4G Receiver Installation Guide
Issue: 02 DRAFT