Custom Search - Uniden BCD396T Manual

Easier to Read BCD396T/UBCD396T Digital Scanner Manual
and press E/yes. See also
Scroll to Set Step
Scroll to Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 to set the step size and press E/yes.
Scroll to Set C-Ch only
Scroll to On or Off and press E/yes.
Scroll to Adjust p25 Level
Scroll to one of three settings and press E/yes.
Auto- the scanner automatically adjusts the digital decode threshold to match the transmission you are hearing when it receives a strong signal and has a
high decode rate.
Manual- lets you manually adjust the digital decode threshold.
Default- sets the digital decode threshold to the default value. This is handy if you have manually adjusted the value to a setting that prevents proper
decoding.
Scroll to Search with Scan
Scroll to Set Lockout
Scroll to 'Unlocked', 'Temporary L/O', or 'Lockout' and press E/yes to save and exit.
Scroll to Set Hold Time
Enter the hold time (0-255 seconds) you desire and press E/yes to save and exit. (0 will search the whole band before continuing).
Press Menu to exit.
Press Menu and scroll to another custom search and repeat the previous steps or press L/O to exit.

Custom Search

lets you search the scanner's 10 programmed frequency ranges. See
Search, in scan mode Press and hold Func then press Scan/Srch.
To start a Custom
At 'Quick Search?' press (.)no.
At 'Search for...' scroll to 'Custom Search' and press E/yes to start searching. Then see Searching.
Searching
(only, not search w/scan)
To start a search see Quick Search,
To toggle search bands on or off (custom
frequency, press Hold. Press Hold to resume.
To hold on a
frequencies, turn the scroll. Press Hold to resume.
To step through the
To change search direction or continue
frequencies, press Hold. Turn the scroll control back or forward while in hold mode. Press Hold to resume.
To step through the
frequency, press L/O.
To lock out a
To unlock frequencies see Reviewing Locked Out
frequency, press Hold to hold on the frequency then press and hold .no(rev). Press Hold to resume.
To check for a repeater
search, press and hold Func then press E/yes(att).
To attenuate a
frequency, press Hold to hold on the frequency then see
To save a
off, press and hold Func then Hold to toggle between
To turn Close Call on or
Programming a Displayed Frequency (while searching)
http://marksscanners.com/396/396.shtml (35 of 51)8/17/2010 10:11:40 PM
Auto Step Sizes.
and press E/yes. (for Motorola and LTR systems).
and press E/yes.
and press E/yes.
and press E/yes. (For use for with 'Search with Scan').
and press E/yes.
Service Search, or Custom Search.
search), press the number key of the search band.
searching, turn the scroll control back or forward.
Frequencies.
Programming Displayed
Editing a Custom Search
Frequency.
CC Priority, CC DND, and 'CC Off'.
first.
Contents