Editing A Service Search - Uniden BCD396T Manual

Easier to Read BCD396T/UBCD396T Digital Scanner Manual
To start searching at a specific frequency while scanning or
Enter the new frequency you wish to start at then press Hold to set the new starting frequency.
Press Hold again to release hold mode and start searching. Then see Searching.

Editing a Service Search

Search, press and hold Func then press Scan/Srch. At 'Quick Search?' press (.)no.
To Edit a Service
Or, Press Menu. Scroll to 'Search For...' and press E/yes.
Scroll to 'Edit Service' and press E/yes.
Scroll to the service search you want to edit and press E/yes.
Scroll to Set Delay Time
Scroll to 1, 2, 3, 4, 5, seconds or Off to set delay and press E/yes.
Scroll to Set Attenuator
Scroll to On or Off and press E/yes.
Scroll to Search with Scan
Scroll to Set Lockout
Scroll to 'Unlocked', 'Temporary L/O', or 'Lockout' and press E/yes to save and exit.
Scroll to Set Hold Time
Enter the hold time (0-255 seconds) you desire and press E/yes to save and exit.
Press Menu and scroll to another service search and repeat the previous steps or press L/O to exit.
Service Search
lets you quickly select and search the scanner's preprogrammed frequencies. See
Search, press and hold Func then press Scan/Srch. At 'Quick Search?' press (.)no.
To start a Service
Or, Press Menu. Scroll to 'Search For...' and press E/yes.
Scroll to 'Service Search' and press E/yes.
Scroll to the service search and press E/yes to start searching. Then see Searching.
Editing a Custom Search
Custom 2, and so on.
Search, in scan mode Press and hold Func then press Scan/Srch.
To Edit a Custom
At 'Quick Search?' press (.)no.
At 'Search for...' scroll to 'Edit Custom' and press E/yes.
Scroll to the custom search you want to edit (1-10) and press E/yes.
Scroll to Edit Name
Scroll to Edit Srch Limit
At 'Set Lower Limit', enter the lower limit of the search range and press E/yes.
At 'Set Upper Limit', enter the upper limit of the search range and press E/yes.
Scroll to Set Delay Time
Scroll to 1, 2, 3, 4, 5, seconds or Off to set delay and press E/yes.
Scroll to Set Modulation
Scroll to Auto, AM, FM, NFM, or WFM the set the modulation and press E/yes.
Scroll to Set Attenuator
Scroll to On or Off to set the attenuation and press E/yes.
Scroll to Set Data Skip
Scroll to On or Off to turn Data Skip on or off and press E/yes.
http://marksscanners.com/396/396.shtml (34 of 51)8/17/2010 10:11:40 PM
and press E/yes.
and press E/yes.
and press E/yes.
and press E/yes. (Used for 'Search with Scan' only).
and press E/yes.
allows you to edit the 10 custom search ranges. The default custom search range names appear as Custom 1,
and press E/yes. See
Entering Text.
and press E/yes.
and press E/yes.
and press E/yes.
and press E/yes.
and press E/yes.
searching, press Hold to hold on any channel or frequency.
Edit Service Search first.
Contents