Uniden BCD396T Manual page 17

Easier to Read BCD396T/UBCD396T Digital Scanner Manual
Note: EDACS Wide is the same as EDACS Standard and use a 9600 baud control channel. EDACS Narrow-band systems use a 4800 baud control
channel. See here
At 'Edit Name' press E/yes. To name the system, see
Scroll to 'Set Frequencies' and press E/yes.
At 'New Frequency' and press E/yes.
At 'Input Frequency' enter the frequency and press E/yes.
At 'Input LCN' enter the LCN number and press E/yes. See
At 'Edit Frequency' press Menu and scroll down to 'New Frequency', then press E/yes. Repeat to program the rest of the trunking frequencies. Press
Scan to exit.
Then see Editing System Options
To Program a new LTR system, press Menu. At 'Program System' press E/yes.
At 'Select System' scroll to 'New System' and press E/yes.
At 'Select Sys Type' scroll to 'LT' and press E/yes. At 'Confirm?' press E/yes.
At 'Edit Name' press E/yes. To name the system, see
Scroll to 'Set Frequencies' and press E/yes.
At 'New Frequency' and press E/yes.
At 'Input Frequency' enter the frequency and press E/yes.
At 'Input LCN' enter the LCN number and press E/yes. See
At 'Edit Frequency' press Menu and scroll down to 'New Frequency', then press E/yes. Repeat to program the rest of the trunking frequencies. Press
Scan to exit.
Then see Editing System Options
Name, press the Menu button. At 'Program System' press E/yes.
To Edit the System
At 'Select System' scroll to the system that you want to assign a name to and press E/yes.
At 'Edit Name' press E/yes. See
Press Scan to exit.
To set the Modulation for a Motorola or LTR
At 'Select System' scroll to the system you want to set the modulation in and press E/yes.
Scroll to 'Set Modulation' and press E/yes.
Scroll to one of three settings and press E/yes.
Auto- the scanner uses the
FM- the scanner uses FM for the frequency band.
NFM- the scanner uses NFM for the frequency band.
Press Menu to exit.
To set the Attenuator for a trunked system:
sources. Attenuation can help reduce interference by about 18 dB. The default setting is off.
system, press the Func then E/yes(att).
While scanning the
Or, press Menu. At 'Program System' press E/yes.
At 'Select System' scroll to the system you want to attenuate and press E/yes.
Scroll to 'Set Attenuator' and press E/yes.
Scroll to On or Off and press E/yes.
Press Menu to exit.
http://marksscanners.com/396/396.shtml (17 of 51)8/17/2010 10:11:40 PM
at RR for a description of SCAT.
Entering
to customize the system. Then see
Entering
to customize the system. Then see
Entering Text.
system, press the Menu button. At 'Program System' press E/yes.
default modulation for the frequency band.
This setting controls whether the attenuator will be on or off for the system. Turn on this setting if you are near strong signal
Text.
Finding EDACS LCN Order.
Creating Groups. Then see
Text.
Finding LTR LCN Order.
Creating Groups. Then see
Programming Frequencies/IDs to program IDs.
Programming Frequencies/IDs to program IDs.
Contents
Contents