Uniden BCD396T Manual page 26

Easier to Read BCD396T/UBCD396T Digital Scanner Manual
To Edit Channel Options
At 'Select System' scroll to the system that contains the channel and press E/yes.
Scroll to 'Edit Group' and press E/yes.
At 'Select Group' scroll to the group that has the channel you want to edit and press E/yes.
Scroll to 'Edit Channel' press E/yes.
At 'Select Channel' scroll to the channel you want to edit and press E/yes.
You can also press E/yes when the channel is displayed in scan mode.
Scroll to the options below and press E/yes. Press Scan/Srch to return to scanning when done with editing.
Edit Name
Set Priority (conv only)
Set Alert
Delete Channel
Edit Name
The channel name appears on the second line of the display when the scanner stops on a channel. If you do not enter a channel name, the scanner displays
the frequency for conventional systems or the talk group ID for trunked systems.
Scroll to 'Edit Name' and press E/yes. See
Press Scan to exit or Menu to return.
Set Priority (conventional only)
to how many channels you can set. When you turn on the Priority feature, the channel(s) will be scanned every 2 seconds. P appears at the end of the default (not the
tagged) name in the display to denote the channel is a priority channel. The default setting is off.
Scroll to 'Set Priority' and press E/yes.
Scroll to On or Off and press E/yes to save and exit.
Set Alert
This setting controls whether the scanner will alert you when the channel becomes active. The default setting is off.
Scroll to 'Set Alert' and press E/yes.
Scroll to the alert (Alert 1-9 or Off) and press E/yes.
At 'Set Level' scroll to 'Level 1-15 or Auto' (the scanner sets the alert beep to the master volume level) and press E/yes.
Delete Channel
Scroll to 'Delete Channel' and press E/yes.
At 'Confirm Delete?' press E/yes to save and exit.
Copy/Paste Channel
The scanner can copy a channel (and all its settings) into a copy buffer to paste into the same system (in a different group) or a group in another
system.
Scroll to 'Copy Channel' press E/yes to save to the channel buffer.
http://marksscanners.com/396/396.shtml (26 of 51)8/17/2010 10:11:40 PM
press Menu. At 'Program System' press E/yes.
Copy/Paste Channel
Edit Frequency or TGID
Set CTCSS/DCS (conv only)
Entering Text.
This setting controls whether the scanner treats the channel as a priority channel while scanning. There doesn't seem to be a limit
Set Modulation (conv only)
Set Attenuator (conv only)
Set Lockout
Contents