Features/Lights/Heaters/Backyard Buttons - Hayward OmniPL HLBPRO4SW Operation Manual

Alarms
An alarm condition will change the mood color of the entire touchscreen and display a "!" symbol in
the upper right side of the associated button as shown:
For more detail, use the Alarm button found in Favorites. Alarms are automatically generated when
the OmniPL detects a condition outside of the normal operating parameters. The Alarm button found
in Favorites will bring you to a screen that displays any active alarms. Some alarms can be manually
deleted; others will remain until the alarm condition is corrected.
SPA
90
F
º
71º F
daylight
air
Home Screen
Deleting Alarms
For Alarms that can be manually deleted, follow the procedure below.
Daylight
Daylight is another button that will appear in Favorites by default. This button is used to change
the screen contrast for better viewing in bright sunshine. Touching this button will toggle Daylight
viewing on and off.
Features/Lights/Heaters/Backyard
These four buttons function similarly. If any water feature, light, heater or backyard accessory has
been configured in the Configuration Wizard, a Features, Lights, Heaters and/or Backyard button will
appear in Favorites. These buttons give you quick access to the Control Screens for all related pool
equipment. These are the same Control Screens that you've used in the Body of Water Features
and Controls Screen section of this manual. For Features, Lights and Heaters you can display the
equipment based on a particular Body of Water or from all Bodies of Water.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
alarm themes
heater
alarm list
CS&D pH High level
CHLOR Low Salt
pH Timeout
ALARM
CS&D pH High level
CHLOR Low Salt
pH Timeout
Alarm
AUTO
AUTO
alarm list
Alarm
ALARM
AUTO
AUTO
20