Installation - Valor Portrait Ledge 569 Series Installation Manual

Installation

1. Fit the stud brackets to the appliance's sides (2
screws/side). Make sure the horizontal tabs are at
the top.
tab at
the top
2. Fit the convection baffle to the top of the appliance
case (2 screws). The convection baffle slips under
the top of the appliance case.
3. Required for installation in combustible
construction. Bend the stand-offs into shape and
fix them to the appliance's case as indicated (4
screws/side, pre-fitted on engine).
WARNING
Failure to install the stand-off spacers may
result in a fire hazard.
4. Required for installation in combustible
construction. Add insulation pad on the top of the
appliance, cutting around the pipe if installing a top
vent.
WARNING
Failure to install the insulation layers may
result in a fire hazard.
5. Mount the appliance to the studs with wood screws
(2/side, not supplied). Make sure the framing is
leveled.
5