Input/Output Signals; Input/Output Signal List - Mitsubishi Electric MELSEC iQ-R Series User Manual

6.3

Input/Output Signals

This section explains the input/output signals of a recorder module.
The following shows an example of assigning input/output signals when the start input/output number of a recorder module is
'0.'
A device X indicates an input signal from a recorder module to a CPU module.
A device Y indicates an output signal from a CPU module to a recorder module.
Precautions
As for input/output signals to a CPU module, do not output (turn ON) 'Use prohibited' signals. Doing so may cause malfunction
of a programmable controller system.

Input/output signal list

The following shows the input/output signal list of a recorder module.
For details on the input/output signals, refer to either of the following:
Page 91 Input signal details
Page 93 Output signal details
Input signals
Device No.
X0
X1
X2
X3
X4
X5
X6
X7 to X1F
Output signals
Device No.
Y0
Y1
Y2
Y3
Y4 to Y1F
6 RECORDER MODULE (DETAILED SPECIFICATIONS)
90
6.3 Input/Output Signals
Signal name
Module READY
SD memory card status
File access status
Recording function operation status
INFO LED status
Module stop error status
Module continuation error status
Use prohibited
Signal name
File access stop request
Clear file access stop request
Clear INFO LED request
Error clear request
Use prohibited