Starting The Mb 11 Software - Maico MB 11 BERAphone Operation Manual

Figure 30
IMPORTANT NOTE: The calibration value for the insert earphone is saved in the
device. Calibration values for inserts with eartips are different from calibration
values for inserts used with EarCups
Never modify an insert earphone by replacing the original tubes and adapters
with the other adapter type. This will result in incorrect stimulus levels
causing inaccurate screening results.
NOTE: When using insert earphones, you cannot use the same transducer for
testing both ears. Only use the red colored transducer for the right ear and the blue
transducer for the left ear.

Starting the MB 11 Software

After starting the computer, launch the MB 11 BERAphone
icon MB 11 USB Version on the desktop or direct from the program menu. The
program launches with the start screen (see figure 22).
Figure 31
8100496 Rev. 6
Operation Manual MB 11 BERAphone
Insert the eartip attached to the red tubing into the baby's right
ear. Do this by pulling gently down and out on the baby's ear
lobe to open up the ear canal. Hold the adapter and twist
(gently) the eartip into the ear canal (Figure 30). The fit of the
eartip should be secure; not superficial. Release the earlobe.
Repeat this procedure inserting the eartip attached to the blue
tubing into the baby's left ear.
If you find that it is difficult to keep both eartips securely in the
baby's ear canals at the same time, you can choose to test one
ear at a time.
Place the insert earphone transducer boxes above or to the
side of the baby's head.
TM
.
48
®
/Classic
®
software by clicking the
23/10/2019