Table of Contents
Advertisement
Glossary
QFP
154
QFP
A quad flat pack is a type of integrated circuit.
Qualifier
A specification that must be met before an action can be taken by the
analyzer. For example, a store qualifier is a specification that must be
met by an incoming state before it can be stored in the trace memory.
The "arm" condition can be used as an additional qualifier. For
example, an external analyzer may be set up to supply a true signal to
the rear panel BNC connector on the card cage when it detects a true
condition in the target system. Then the analyzer can be set up to store
qualify a certain kind of state, but only when the arm signal from the
BNC is true.
Real-Time Execution
Continuous execution of the user program without interference from
the emulator. (Such interference occurs when the emulator temporarily
breaks into the monitor so that it can access register contents or target
system memory or I/O.)
Relative Count
A count in the trace list count column that shows the count between the
present displayed state and the state displayed immediately before it.
Relative time count, for example, shows the elapsed time between the
previous displayed state and the present state. Note that the count is
between displayed states. If your trace list is inverse assembled and/or
dequeued, several states may have been captured in memory between
the present displayed state and the displayed state immediately before
it.
Remote Configuration
The configuration in which an HP 64700 Series emulator is directly
connected to a host computer via a single port. Commands are entered
(typically from an interface program running on the host computer) and
absolute code is downloaded into the emulator through that single port.
Advertisement
Table of Contents
