Updating the firmware using a PC
The firmware, and the program that downloads it into the control card, are included
with the MC6833x emulator probe on the following MS-DOS format floppy disks:
•
6833x EMULATION FIRMWARE
•
64700 SW UTIL
The steps to install or update the emulator firmware are:
1 Connect the HP 64700 card cage to the RS-232 port on your PC.
2 Install the firmware update utility and the emulator firmware.
3 Run "progflash" to update emulator firmware.
The above steps are described in detail on the following pages.
Chapter 5: Installing/Updating Emulator Firmware
Updating the firmware using a PC
93