Chapter 4: Connecting the Emulator to a Target System
Plugging The Emulator Into A Target System
Connecting the emulator to the target system
Plugging the emulator into a target system can be difficult because of mechanical
constraints. If the mechanical constraints cannot be removed so that the emulator
can be plugged directly into the target socket, there are several accessories
available to help with the connection. These accessories are:
Stacking PGA pin protectors.
•
•
QFP Probe Adapter Assembly.
•
HP Elastomeric Probing System for 68332 and 68338
•
HP Elastomeric Probing System for 68336, HP Part Number 64782-63217.
•
•
The specifications given for the emulator do not include the loading of these
accessories.
56
132-pin for 68331/2/4, HP Part Number 1200-1507
160-pin for 68336, HP Part Number 1200-1823
132-pin QFP to PGA flexible adapter for 68331/2/4,
HP Part Number E3407A.
144-pin TQFP to PGA flexible adapter,
order the following part numbers:
– HP E5336A Elastomeric Probe Adapter
– HP E5338A Flexible Adapter
– HP E3416A Transition board for 68332
– HP E5360A Transition board for 68338
160-pin transition board
15x15 Header