To Verify The Performance Of The Emulator - HP 64782 Series Manual

To verify the performance of the emulator

1 If you have a special configuration or session in progress, save it now. This
procedure will cause your session to be lost.
2 Turn off power to the HP 64700 Card Cage.
3 Plug the emulator probe into the Demo Board. (See Chapter 3.)
4 Connect Demo Board power cable from the Demo Board to the HP 64700
Card Cage front panel. (See page 19.)
5 Turn on power to the HP 64700 Card Cage.
6 Establish communication with the emulator from your host or ASCII terminal and
obtain a prompt (such as R>). (See Chapter 2.)
7 Enter: pv 1 <return>
There are different hardware system configurations for the HP 64700 Series
system. For information on hardware configurations, refer to the HP 64700
Installation/Service manual.
Chapter 6: Solving Problems
To verify the performance of the emulator
103