Table of Contents
Advertisement
DTE (Data Terminal Equipment)
A specific RS-232C hardware interface configuration. Typically, DTE
is a terminal or printer.
Embedded Microprocessor System
The microprocessor system which the emulator plugs into.
Emulation Bus Analyzer
A system component built into the HP 64700 that captures the
emulation processor's address, data, and status information.
Emulation Memory
High-speed memory (RAM) in the emulator that can be used in place
of target system memory.
Emulator
An instrument that performs just like the microprocessor it replaces,
but at the same time, it gives you information about the operation of the
processor. An emulator gives you control over target system execution
and allows you to view or modify the contents of processor registers,
target system memory, and I/O resources.
Emulator Probe
The assembly that connects the emulator to the target system
microprocessor socket.
Escape Sequence (transparent mode)
A keyboard input consisting of a special sequence of characters,
beginning with the escape character (1C hexadecimal). This sequence
is used to access an emulator while in transparent mode. When using
multiple emulators and transparent mode to access the different
emulators, each one must be given a unique escape character.
Execution Breakpoint
A BKPT instruction placed in your software in RAM, replacing the
normal instruction at the RAM address. Breakpoints for code in ROM
DTE (Data Terminal Equipment)
Glossary
149
Advertisement
Table of Contents
