Download
Share
Print this page
Belmont X-Calibur V BEL-50N Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Belmont Manuals
  4. Dental equipment
  5. X-Calibur V BEL-50N
  6. Installation instructions manual

Belmont X-Calibur V BEL-50N Installation Instructions Manual

Dental chair
Hide thumbs Also See for X-Calibur V BEL-50N:

Advertisement

Quick Links

DENTAL CHAIR
This manual provides installation instructions for the BEL-50N Chair.
The instructions contained in this booklet should be thoroughly read and
understood before installation of the chair.
After the installation has been completed, keep this manual in a safe place.
INSTALLATION
INSTRUCTIONS
IMPORTANT
BEL-50N
R
AEFS97D0

Advertisement

loading
Need help?

Need help?

Do you have a question about the X-Calibur V BEL-50N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Belmont X-Calibur V BEL-50N

Summary of Contents for Belmont X-Calibur V BEL-50N

  • Page 1 BEL-50N DENTAL CHAIR INSTALLATION INSTRUCTIONS IMPORTANT This manual provides installation instructions for the BEL-50N Chair. The instructions contained in this booklet should be thoroughly read and understood before installation of the chair. After the installation has been completed, keep this manual in a safe place. AEFS97D0...

  • Page 3: Table Of Contents

    Table of Contents 1. Overview and major components ----------------------------------------------- 1A 2. Dimensions and Specifications -------------------------------------------------- 2A 3. Introduction ------------------------------------------------------------------------ 3 4. Installation ------------------------------------------------------------------------- 4 5. Adjustment ------------------------------------------------------------------------ 8B 6. Electric Diagram ------------------------------------------------------------------ 10B Intended Use of the Product This product is intended for the exclusive use for diagnoses, treatments and relative procedures of dentistry, and must be operated or handled by the qualified dentists or by dental staffs under the supervision of the dentist.Such dentists or dental staffs should instruct and/or assist the patients to approach to and leave from the product.

  • Page 4: Overview And Major Components

    1. OVERVIEW, MAJOR COMPONENTS Figure 1 1. Headrest Assembly 17. Sub Link Cover(Lower) 9. Seat Cushion 2. Backrest Cushion 18. Main Power Switch 10.Backrest Cover 3. Armrest 19. Fuse Holder 11.Seat Back Support 4. Main Link Cover 20. Backrest Control Panels 12.Dome Casting Cover 5.

  • Page 5: Dimensions And Specifications

    2. DIMENSIONS and SPECIFICATIONS 2-1. Dimensions (Inches) 74-1/4 23-5/8 18-1/2 5-1/4 17-9/16 34-3/4 74-1/4 15-7/8 34-3/4 23-1/4 23-7/8 24-1/2 34-3/4 70˚ 20˚ 6˚ 20˚ 6˚ 10˚ 34-3/4 22-1/4 2-2. Specifications * Sealed hydraulic system powered by 3.5 A motor pump * Base plate: 1/2"...

  • Page 6: Introduction

    3. INTRODUCTION 3-1. Precautions for Installation • Keep the equipment away from water. • Keep in a circumstances safe from influence by temparature, humidity, wind, sun light, air containing salts and minerals. • Care about stability such as inclination, vibration and impact, including handling and transportation. •...

  • Page 7: Installation

    4. INSTALLATION 4-1. Unpacking the chair base 1) Place chair carton close to installation location. Remove all the staples fixing the carton to pallet, or cut the carton just above the stapled line, and remove the carton. (See Figure 1.) Staples 2) Using a 10mm socket, loosen and remove Figure 1...
  • Page 8 4-2. Installation 1) Plug chair into 120VAC outlet. CAUTION To avoid the risk of electrick shock, this equipment must only be connected to a supply mains with protective earth. Grounding reliability can only archieved when the equipment is connected to an equivalent receptacle marked HOSPITAL ONLY or HOSPITAL GRADE.
  • Page 9 Phillips Head Screws 7) Attach metal seat to seat frame, (5mm x8) using 4(5mm x 6) phillips head Phillips Head Screws Velcro (5mm x6) screws. Metal Seat (See Figure 5 b.) 8) Fasten 2 velcro strips to holes on Seat Support Panel metal seat and seat support panel Seat Back Support using 4(5mm x 8) phillips head...
  • Page 10 Headrest Cushion Headrest Mechanism 10) Attach headrest cushion to headrest Phillips Flat Head Screw mechanism using 4(10-24 x 3/4) (10 - 24 x 3/4 ) phillips flat head screws and slide headrest bar into opening in top of backrest. (See Figure 6c) Headrest Bar Figure 6c Air Vent Plug...

  • Page 11: Adjustment

    5. ADJUSTMENT 5-1. Speed Controls (Figures 9a and 9b) Seat lowering speed and backrest reclining speed can be adjusted by the speed control knob on the solenoid valve block. The solenoid valve numbers and functions are shown in Fig.9b. A. Remove the pump cover. The solenoid valve block is located on the left side at the front of the chair base.
  • Page 12 IMPORTANT To avoid a malfunction when setting lower limit, make sure that there is clearance between the safety plate and the chair base. If a swing mounted delivery system is attached to the chair, set lower travel limit so delivery system components do not contact chair pump and cantilever lift arm covers.

  • Page 13: Electric Diagram

    5. ELECTRIC DIAGRAM - 10B -...
  • Page 14 MEMO BELMONT EQUIPMENT, Division of Takara Belmont, USA, Inc. 101 Belmont Drive Somerset, New Jersey 08873 U.S.A. TEL.:(732) 469-5000 / (800) 223-1192 Fax.:(732)356-1035 www.belmontequip.com TAKARA CO, CANADA LTD. 2076 S. Sheridan Way, Mississauga, Ont., L5J2M4, Can. TEL.:(905) 822-2755 Fax.:(905)822-6203 www.takarabelmont.ca TAKARA BELMONT CORPORATION (Manufacturer) 2-1-1,Higashi-shinsaibashi,Chuo-ku,Osaka,Japan TEL.: 81-6-6213-5945 FAX.: 81-6-6212-3680...